How to Remove Graffiti

Removing graffiti should be done at the earliest time possible. Paint is easier to remove when it is not yet been absorbed into the surface. Paint and other graffiti removal products can be kept ready, to remove graffiti immediately as soon as they are written.

According to graffiti removal tips, the first step to consider is to identify the type of the vandalized surface. Using graffiti removal products with extra strength is advisable for tough surfaces. After applying the graffiti remover, use brush with wire bristles in order to reach pores and holes. Allow the graffiti remover to take effect before washing over with pressured stream of water or soda blaster.

In most cases, graffiti removal products with solvents are the effective in many types of surfaces. Solvent is a liquid substance that has the capability to dissolve another substance. Graffiti removal tips suggest choosing the appropriate solvent in order to perform the cleaning easier. When the wrong solvent is used, it will be instrumental in damaging rather than cleaning. It is necessary to understand solvent properties before buying.

When the surface involved is painted concrete or brick, the use of fluid from the zest of orange will to do the job. This would need large amount of water to rinse the surface. Extra care should be considered when removing graffiti from surfaces that are coated with vinyl. Graffiti remover with lacquer thinner can mar the vinyl having qualities of plastic. It is advisable to experiment in small area first. Apply the graffiti remover carefully, and use clean cloth in wiping the area being cleared.

With wooden surfaces, thinners can be useful as well as acetone solution. Use graffiti removal products with stain-removing primer on oil or latex based surfaces. Some graffiti removal tips recommend wood dye and creosote in removing graffiti that are embedded into the wood grain. Use extra-strength graffiti remover for graffiti on fiberglass surface, and care must be observed in rinsing.

Graffiti on glass and Plexiglas can be removed using a scraper and solvents. When rag is used, the technique is holding the rag a moment longer before totally wiping the surface in order to ensure that the solvent works effectively. Thorough rinsing is necessary after the scrapping and application of solvent is done. Solvent can also be applied with most unpainted metal such as stainless steel and iron. Some graffiti removal products with lacquer thinner may inflict oxidation. Use clean rag technique in wiping metal surfaces.

In some cases removing graffiti using graffiti removal products and techniques are impractical when it comes cleaning large vandalized area. Graffiti removal tips recommend painting over the graffiti is more effective. Before performing this option cleaning of surface from grease and dirt, have to be done. Proper choice of the type and quality of paint is necessary in order make the paint over job successful. In some cases, the paint used in writing the graffiti is tough and hard to cover. Certain kind of paint with special composition such as stain blocker is very useful.